Xilinx is to demonstrate what it said is the world's first FPGA-based Ethernet audio/video briding (EAVB) network implementation optimized for carrying high-speed data traffic within an automobile at the 2012 International Consumer Electronics Show (CES).
The demonstration will highlight the capabilities of the new EAVB Development Kit co-developed with Xilinx Alliance Program member Digital Design Corp. (DDC) to give automotive system developers the framework and tools necessary to accelerate their development of applications that deliver a richer experience for drivers and passengers.
The demonstration will feature multi-camera driver assistance and infotainment A/V sources streaming, simultaneously on a single network. Also, a 3D vehicle surround view demonstration built on Spartan-6 FPGAs will showcase real-time, multi-camera driver assistance solutions.
“The IEEE 802.1 EAVB standard is already gaining the attention of a number of leading automotive manufacturers even though the specifications are still being finalized. This isn’t surprising because the attractiveness of a fully open, flexible and ubiquitous network standard like Ethernet, enhanced to address the unique real-time media streaming needs of automotive systems, is too difficult to resist. As a founding member of the AVnu Alliance, dedicated to enabling an ecosystem of compatible EAVB solutions for reliable transport of audio and video content, our work with DDC furthers that goal and is a natural step in our commitment to offer automotive customers a complete array of vehicle connectivity options that enables them to keep pace with rapidly evolving consumer and information technologies,” said Nick DiFiore, Director of Xilinx’s Automotive Segment.
The EAVB solution expands the previously released Xilinx Ethernet AVB Endpoint LogiCORE IP into a complete network interface solution, while providing flexibility for addressing a customer’s unique application interface needs. The solution also offers maximum integration potential where Xilinx FPGAs are already commonly used. This includes traditional infotainment connectivity (i.e. host processor companion chip) as well as Driver Assistance (DA) applications, where the FPGA is typically performing image processing for features such as surround view, blind spot detection and real-time lane tracking.
“Drivers and passengers are not only expecting higher resolution displays and graphics quality, but critical information needs to be displayed in real-time as drivers are using it to make instantaneous decisions. This development kit proves that EAVB can deliver world-class audio and video quality to passengers while taking advantage of the same Xilinx FPGA devices already on board many driver assistance systems. The modular IP we’ve included in the kit is separately licensable so that customers can optimize the solution for their specific application needs.”said Scott Keane, Visual Systems Engineer, DDC.
The emerging IEEE 802.1 AS, QAT and QAV standards, fully implemented in the Xilinx/DDC EAVB solution, make for high-fidelity, low-latency audio and video transport in a completely deterministic fashion over a 100Mb/1Gb Ethernet-based local area network (LAN). In the automotive environment, this means a single homogenous LAN can be configured to carry a range of infotainment and DA data content, including system control, audio and video information.
Further, the system designer can establish any network topology (e.g. star, tree or combination) expanding overall network bandwidth as needed, and up to 75 percent of the bandwidth on any given connection may be reserved to guarantee quality of service for media streaming. The DDC IP cores includes facilities for A/V data packetization, media extraction, media clock recovery and stream reservation protocol, as well as handling of legacy Ethernet traffic for generic data or command/control.
In the Xilinx/DDC demonstration, video data from four different cameras are streamed over an EAVB network to an FPGA where further DA video and graphics processing can be performed (e.g. 3D vehicle surround view). In addition, separate infotainment A/V source streaming to a remote display is performed simultaneously on the same network. Low latency MJPEG video compression is also implemented to further manage network bandwidth.
Spartan-6 FPGAs for Automotive
The EAVB Development Kit is based on the Xilinx Automotive (XA) Spartan-6 FPGA, which provides leading system integration capabilities and the lowest total cost for cutting-edge high-volume automotive applications. The ten-member XA Spartan-6 family delivers expanded densities ranging from 3,840 to 101,261 logic cells, up to 180 parallel DSP MAC engines and comprehensive I/O capability with speeds up to 3.125GHz. Built on a mature 45nm low-power copper interconnect process technology that delivers an optimal balance of cost, power and performance, the XA Spartan-6 family offers an efficient, dual-register 6-input look-up table (LUT) logic configuration and a selection of built-in system-level blocks.
Pricing & Availability
The DDC/Xilinx EAVB Development Kit is currently available from DDC for $9,999 and includes hardware, reference design, and a single-user evaluation IP license.
For more information visit http://www.xilinx.com/automotive