The PIM4328P from Ericsson Power Modules is a new 390-540W power interface module (PIM) compliant with the 300W de facto industry-standard footprint. The quarter-brick PIM4328P is optimized to simplify design in blade servers based on Advanced TCA (PICMG 3.0) systems. Ericsson's low-EMI design rules and best practices ensure that minimal external filtering is needed to meet the CISPR Class B EMC standards required for Information and Communications Technology (ICT) applications. Ripple and noise are minimized, circuit design is simplified, and both parts count and system costs are reduced, without compromising performance.
Based on Ericsson's energy-optimized platform, the PIM4328P operates over an input range of 36V to 75V and the main unit is able to sustain a permanent output current of 10A without forced airflow up to +70°C, and up to +90°C with only 2.0m/s (400LFM). Output power is 390W at minimum 39V input and up to 540W when the input is minimum 54V. This allows headroom when there is a need to upgrade boards with new processors or additional memory in systems operating in battery or non-battery back-up applications.
The PIM4328P combines exceptionally low EMI with very high efficiency. It is the first in a planned line of next-generation PIMs that deliver higher power and integrate standardized user interface.
With 99% typical efficiency at 300W output, the PIM4328P maintains the high standards of dynamic and load step performance required in ATCA equipment while limiting power losses across the filtering unit to a very low level.
The 2250Vdc isolated, dual power management, 12W DC/DC output voltages are 3.3V / 3.6A and 5V / 0.15A. Other features of the PIM4328P include protection against input transients, reverse polarity, over-temperature, over-current, input under-voltage, and inrush current. The module complies with RoHS requirement, has integral hot swap functionality and hold-up charge, and discharge management. The inputs include dual power feeds with ORing functionality and 'enable' signaling.
MTBF is 1.8 million hours (Telcordia SR-332 Issue 2, Method 1) and meets safety requirements according to IEC/EN/UL 60950-1.
The new PIM is suitable for any industrial, telecommunications and data communications application employing distributed power architecture.
The PIM4328P is available now, priced at $43 USD each in OEM quantities.